{"id":830,"date":"2017-04-19T10:48:21","date_gmt":"2017-04-19T07:48:21","guid":{"rendered":"http:\/\/www.korozyonuzmani.com\/?p=830"},"modified":"2019-03-23T17:58:15","modified_gmt":"2019-03-23T14:58:15","slug":"galvaniz-nasil-yapilir","status":"publish","type":"post","link":"https:\/\/www.korozyonuzmani.com\/en\/galvaniz-nasil-yapilir\/","title":{"rendered":"How to Galvanize Steel?"},"content":{"rendered":"<p><\/p>\n<div class=\"blog-small-detail\"><\/div>\n<div class=\"blog-detail\">\n<p>Galvanizing steel coats it with a layer of zinc to protect it from corrosion. Zinc was first used in construction around the time of the destruction of Pompeii, but it was first used to galvanize steel (actually iron) in 1742 and the process patented in 1837.\u00a0Galvanized steel is used in making sheet metal flashing, gutters, and downspouts, as well as for exterior nails. There are several processes that can be used to galvanize steel: hot-dip galvanizing, electrogalvanizing, sherardizing, and metallic spraying.<\/p>\n<h2>1-Hot-Dip Galvanizing<\/h2>\n<p><img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz1(1).jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">1.1. Clean away the surface contaminants.<\/b>\u00a0Before any other steps can be taken, the steel surface must be cleaned thoroughly. How this is done depends on what has to be cleaned away.<\/p>\n<ul>\n<li>Dirt, grease, oil, or paint markings require the use of a mild acid, a hot alkali, or a biological cleaning agent.<\/li>\n<li>Asphalt, epoxy, vinyl, or the slag from welding need to be cleaned by sandblasting or with other abrasives.<\/li>\n<\/ul>\n<div><img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz2(1).jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">1.2. Pickle away the rust.<\/b>\u00a0Pickling is done with hydrochloric acid or hot sulfuric acid; it removes both rust and mill scale.<\/p>\n<ul>\n<li>In some cases, abrasive cleaning may be enough to remove the rust, or it may be necessary to use both a pickling solution and abrasives. In some cases, larger abrasives such as buckshot are air-blasted onto the steel.<\/li>\n<\/ul>\n<div><img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz3.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">1.3. Put the metal in flux.<\/b>\u00a0In this case, \u201cflux\u201d is a solution of zinc ammonium chloride that removes any remaining rust and scale and protects the steel from rusting until it is actually galvanized.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz4.jpg\" alt=\"\" \/><\/div>\n<\/div>\n<p><b class=\"whb\">1.4. Immerse the steel in molten zinc.<\/b>\u00a0The bath of molten zinc should be at least 98 percent zinc and maintained at a temperature range of 815 to 850 degrees F (435 to 455 degrees C).<\/p>\n<ul>\n<li>While the steel is immersed in the zinc bath, its iron reacts with the zinc to form a series of alloy layers and an outer layer of pure zinc.<\/li>\n<\/ul>\n<div><img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz5.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">1.5. Take the galvanized steel out of the zinc bath slowly.<\/b>\u00a0Most of the excess zinc will drain off; what doesn\u2019t drain off can be vibrated off or spun off in a centrifuge.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz6.jpg\" alt=\"\" \/><\/div>\n<p><b class=\"whb\">1.6. Cool the galvanized steel.<\/b>\u00a0Cooling the metal stops the galvanization reaction, which continues as long as the steel is the same temperature it was while immersed in the zinc bath. Cooling can be done in one of several ways:<sup id=\"_ref-3\" class=\"reference\"><a href=\"http:\/\/www.wikihow.com\/Galvanize-Steel#_note-3\">[3]<\/a><\/sup><\/p>\n<ul>\n<li>Immerse the steel in a passivation solution such as potassium hydroxide.<sup id=\"_ref-4\" class=\"reference\"><a href=\"http:\/\/www.wikihow.com\/Galvanize-Steel#_note-4\">[4]<\/a><\/sup><\/li>\n<li>Immerse the steel in water.<\/li>\n<li>Let the steel cool in the open air.<\/li>\n<\/ul>\n<div><img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz7.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">1.7. Inspect the galvanized steel.<\/b>\u00a0Once the galvanized steel is cooled, check it to make sure the zinc coating looks good, sticks to the steel, and is thick enough. There are a number of tests that can be performed to ensure the galvanization was successful.<\/div>\n<ul>\n<li>Standards for hot-dip galvanizing and inspecting its results have been established by such organizations as the American Society for Testing and Materials (now called ASTM International),the International Standards Organization (ISO), the Canadian Standards Association (CSA), and the American Association of State Highway and Transportation Officials (AASHTO).<\/li>\n<\/ul>\n<div>2-Electrogalvanizing<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz8.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">2.1. Prepare the steel as for hot-dip galvanizing.<\/b>\u00a0The steel must be cleaned and de-rusted before the electrogalvanization can occur.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz9.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">2.2. Prepare a zinc electrolyte solution.<\/b>\u00a0Either zinc sulfate or zinc cyanide is normally used for the electrolyte.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz10.jpg\" alt=\"\" \/><\/div>\n<div><\/div>\n<p><b class=\"whb\">2.3.\u00a0<\/b><b class=\"whb\">Immerse the steel in the electrolyte.<\/b>\u00a0The solution will react with the steel to cause the zinc to precipitate onto the steel, coating it. The longer the steel is left in\u00a0the electrolyte, the thicker the coating that will be produced.<\/p>\n<ul>\n<li>While this method offers greater control over how thick the zinc coating is than does hot-dip galvanizing, it usually does not allow for layers to become as thick.<\/li>\n<\/ul>\n<div>3-Sherardizing<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz11.jpg\" alt=\"\" \/><\/div>\n<div><b class=\"whb\">3.1. Prepare the steel as with the other galvanization methods.<\/b>\u00a0Clean away the dirt with acid or sandblasting as necessary and pickle away the rust.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz12.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">3.2. Place the steel in an airless enclosure.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz13.jpg\" alt=\"\" \/><\/b><\/div>\n<p><b class=\"whb\">3.3. Surround the steel with powdered zinc.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz14.jpg\" alt=\"\" \/><\/b><br \/>\n<b class=\"whb\">3.4. Heat the steel.<\/b>\u00a0This melts the powdered zinc into a liquid that, when cooled, leaving a thin alloy coating.<\/p>\n<ul>\n<li>Sherardizing is best used for shaped steel pieces, as the galvanic coating will follow the configurations of the steel underneath. It is best used with fairly small metal objects.<\/li>\n<\/ul>\n<div>4-Metallic Spraying<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz15.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">4.1. Prepare the steel as with the other methods.<\/b>\u00a0Clean off all the dirt and remove the rust so it\u2019s ready to be sprayed.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz16.jpg\" alt=\"\" \/><br \/>\n<b class=\"whb\">4.2. Spray on a fine molten zinc coating.<br \/>\n<img decoding=\"async\" src=\"http:\/\/stmcoatech.com\/upload\/userfiles\/images\/galvaniz17.jpg\" alt=\"\" \/><\/b><\/div>\n<div><\/div>\n<p><b class=\"whb\">4.3. Heat the coated steel to ensure proper bonding.<\/b><\/p>\n<ul>\n<li>Galvanic coatings produced with this method are less brittle and less prone to peeling and flaking, but provide less protection from rusting for the steel underneath.<\/li>\n<\/ul>\n<div><strong>Reference:<\/strong><br \/>\n<a href=\"http:\/\/www.teknikport.com\/2012\/04\/galvaniz\/\">http:\/\/www.teknikport.com<\/a><br \/>\n<a href=\"http:\/\/www.wikihow.com\/Galvanize-Steel\">http:\/\/www.wikihow.com<\/a><br \/>\nhttp:\/\/www.karmametal.net<\/div>\n<\/div>\n<p><\/p>","protected":false},"excerpt":{"rendered":"<p>Galvanizing steel coats it with a layer of zinc to protect it from corrosion. Zinc was first used in construction<\/p>\n","protected":false},"author":1,"featured_media":3585,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1],"tags":[],"_links":{"self":[{"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/posts\/830"}],"collection":[{"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/comments?post=830"}],"version-history":[{"count":2,"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/posts\/830\/revisions"}],"predecessor-version":[{"id":3586,"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/posts\/830\/revisions\/3586"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/media\/3585"}],"wp:attachment":[{"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/media?parent=830"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/categories?post=830"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.korozyonuzmani.com\/en\/wp-json\/wp\/v2\/tags?post=830"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}